Description

MOMAND CARBURATOR,THROTTLE BODY & BODY INTAKE CLEANER is an aggressive solvent blend formulated to quickly clean fuel injector throttle body, throttle valve, idle air control valves, PCV valves, and other intake components where deposits occur. These deposits can cause rough idling, stalling ,hard starting and poor acceleration. Stop smoke for is an engine oil treatment that when added to engine oil will seal the gaps between worn internal moving engine parts . It will reduce oil burn, engine wear and harmful emissions.

THROTTLE BODY:
Remove air intake bellows. Spray to coat residue build-up on throttle plate and surrounding surface. Reattach bellows, start engine with vehicle in park , depress the gas pedal about half way a few times to clean.

METALPARTS:
Spray on metal parts. If necessary, wipe clean, only use on unpainted metal surfaces.

BENEFITS:
Stops and prevents oil leakages through seals
Eliminates the need for expensive engine repair
Makes seals swell back to original size and regain all-new pliability
Prolongs the service life of the engine
Reduces emission of hazardous exhaust gases
Improves engine performance by enhancing motor compression

DIRECTIONS:
Open the engine for5-10 minutes
Remove the air cleaner. For the engine at fast idle (5000-6000rpm), spray the carb cleaner into the air-horn, flooring choke, throttle shafts and plates.
Gums ,varnishes and Carbon Deposits will be burnt away through exhaust gases.
Turn of the engine and install the air cleaner again.
For the Fuel Injection system,spray1/2 can of this Carb Cleaner directly into 1/2 tank fuel.